Groundwater Development and Irrigation

Click through for more information:

Byron Jackson SUBM Deep-Well Submersible (Oil-Filled Design) Pump -The Flowserve Byron Jackson SUBM submersible motor pump is an oil-filled unit built for the most demanding deep well services. Rugged, reliable and long lasting, these units offer significant total life cycle cost savings. DMX ISO 13709/API 610 (BB3) Between Bearings, Single Case, Axially Split, Multistage Pump - The Flowserve DMX is an axially split, multistage pump designed to API 610 (BB3), latest edition. DMX pumps are particularly well suited for process charge, pipeline and injection services where uncompromising reliability over wide ranges is imperative. DS Overhung, Double Volute, End Suction Industrial Process Pump - This versatile end-suction pump features a double volute configuration that greatly reduces radial forces and produces a higher efficiency over the full range of the head-capacity curve than single volute counterparts. ECPJ ISO 13709/API 610 (VS4) Vertical Sump Pump - The Flowserve ECPJ is a rugged, single stage vertical lineshaft sump pump designed to perform tough jobs reliably, under a variety of difficult conditions. Based on a modular design system, it is fully compliant with the latest ISO 13709/API 610 (VS4) standards and may be custom engineered for the specific application in which it will be used. F-Line End Suction Multistage Industrial Process Pumps - The F-Line is a family of multistage, overhung pumps with excellent hydraulic efficiency and high suction lift capability, making them ideal for high pressure water applications. Available in several configurations, including the FP, the F-Line is built upon a modular platform that enables the pumps to be accurately sized for the required operating conditions. FRBHJC Overhung Cantilever Sump Pump - The FRBHJC is a true stiff-shaft vertical cantilever design developed to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as numerous other industries, particularly when flushing liquids are not available or cannot be tolerated. IPS APEX™ - IPS APEX is the industry's most sophisticated tool for data acquisition, diagnostics and intelligent control. The IPS APEX solution helps users lower life-cycle costs by delivering actionable information to optimize process control and equipment operation. IPS Power Monitor™ - The IPS Power Monitor (model KW941) monitors and displays actual power to the rotating equipment. The IPS Power Monitor is equipped with a programmable startup delay as well as low and high trip points offering simultaneous protection from underload and overload operating conditions. IPS Tempo™ - The IPS Tempo is a user-friendly, variable frequency drive (VFD) with pre-engineered optimization, protection and control features for rotating equipment. The IPS Tempo solution extends equipment life and lowers life-cycle costs. When connected to specific sensors, it can be configured to enable automated process control and sense detrimental operating conditions, such as closed valves, off-curve operation, dry-running and pump cavitation. LR Between Bearings, Single Case, Axially Split, Single Stage Pump -The LR family of pumps provides a broad range of hydraulic coverage and low total cost of ownership. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution. MF Overhung Solids Handling Pump - The Flowserve MF is an end-suction, side discharge, mixed flow, non-clog pump. This pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern. MN Large Capacity, Solids Handling Pump - The Flowserve MN is an end-suction, side discharge, mixed flow, non-clog pump. This large capacity pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern. MVE End Suction, Overhung Industrial Process Pump - The MVE mixed flow, single stage volute pump is designed to deliver high volume flow at low to medium heads. It provides reliable performance in numerous industrial, municipal and agriculture services. Pleuger SUBM Deep-Well Vertical Submersible (Water-Filled Design) Pump -The Pleuger SUBM submersible motor pump uses water-filled, wet-wound motors. This design is environmentally friendly, provides high efficiency and offers great reliability. WX Between Bearings, Single Case, Radially Split, Multistage, Ring Section Pump - Available in various sizes, hydraulics and material combinations, the WX is well suited for a wide range of applications. It is designed to provide reliable, efficient performance with total life cycle cost economy. MPT Self-Priming, Overhung, Solids Handling Pump -The Flowserve MPT is a self-priming, solids handling pump designed to provide reliable, peak performance and low cost in demanding services containing suspended solids. The MPT deftly handles dirty, gritty water as well as free-flowing slurries, sewage, sewage sludge and many trade effluents. LNN Between Bearings, Axially Split, Single Stage Pump - The Flowserve LNN is an axially split, double suction pump design featuring 145 impeller and volute combinations resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications. NM Between Bearings, Single Case, Radially Split, Multistage, Ring Section Pump - The NM is a radially split, multistage, ring section pump designed for a wide range of process and industrial applications. MENBLOC Close Coupled, Overhung Industrial Process Pump - MENBLOC is the closed coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical alternative to the frame-mounted ME. LLR Between Bearing, Axially Split, Two Stage, General Industry Pump - The two stage LLR is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single stage LR and the vertical LRV. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution. VCT Vertical Mixed Flow - VCT pumps are designed for extended operation in services where large capacities are required at relatively low pressures. Ideal for wet pit installations, VCTs offer multiple hydraulic combinations and design features to suit application needs. VPC Vertical Turbine, Double Case Pump - The VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited NPSH available. LRV Vertical, Between Bearing, Axially Split, Single Stage, General Industry Pump - The vertical, single stage LRV is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single stage LR and the two stage LLR. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution. QL and QLQ Vertical Double Suction, Twin Volute Wet Pit - The Flowserve QL vertical, double suction pump has a single impeller and true twin volute design that produces more head and can operate at higher speeds than conventional, multistaged vertical turbine models. It can be used in all wet pit applications and virtually eliminates erosion and corrosion of the shaft, bearings and all internal components. MEN Overhung, End Suction Industrial Process Pump - The rugged and reliable MEN end suction water pump is the preferred choice for general purpose water applications. Versatile and dependable, the MEN offers interchangeable parts among a wide variety of pump sizes and configurations. VSMP Overhung, Vertical Cantilever, Immersion Pump - The VSMP vertical standard motor pump is a vertical immersion centrifugal pump designed for general industry use. QLC and QLQC Vertical Double Case, Double Suction Twin Volute - The QLC and QLQC are double casing, double suction, vertical turbine pumps. Available in single or multistage units and featuring true twin volutes, these pumps incorporate the proven hydraulics of the QL and QLQ into a double casing configuration. VTP Vertical Turbine, Wet Pit Pump - The VTP vertical turbine pump is a diffuser type, single or multistage design for continuous service in wet pit and deep well applications. With more than 300 bowl and impeller designs, the VTP provides unsurpassed hydraulic coverage to ensure the best pump selection for a wide variety of services. MVX Solids Handling, Wet Pit - The Flowserve MVX is a rugged wet pit pump designed for use in solids handling applications and other wet pit services. Built and tested in accordance with Hydraulic Institute standards, the MVX non-clog pump boasts numerous reliability- and performance-enhancing benefits. LNNC Between Bearing, Axially Split, Single Stage Pump - The Flowserve LNNC is an axially split, double suction pump and is horizontally mounted with bottom suction and side discharge for maximum flexibility. Featuring 145 impeller and volute combinations, resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications. CVP Vertical, Concrete Volute Wet Pit Pump - The Flowserve BSV and BCV concrete volute pumps are vertical, wet pit designs used for large flow applications requiring continuous operation. The massive concrete volute substantially reduces noise and vibration, offers high corrosion and erosion resistance, significantly increasing pump life. WUJ ISO 13709/API 610 (VS1), latest ed. (VS1) Vertical Lineshaft, Multistage Wet Pit Pump - The Flowserve WUJ vertical turbine is a radial flow or axial flow type, multistage, heavy-duty single casing pump. It is designed for wet pit or deep well applications. MSX Overhung, Solids Handling, Submersible Pump - The Flowserve MSX family of solids handling, submersible pumps is engineered to perform efficiently in the most challenging environments, from pumping raw sewage to moving industrial wastewater and solids-laden liquids. WD and WDX Between Bearings, Single Case, Radially Split, Multistage, Ring Section -WD and WDX are radially split, high-pressure, multistage, ring section pumps designed for a wide range of process and industrial applications. FRBH Heavy-Duty Paper Stock and Process Overhung Slurry and Solids Handling Pump - The FRBH is one of the world’s most efficient and reliable pumps Able to perform effectively across a broad operating range, the high efficiency of the FRBH translates into low total cost of ownership.