Type FA Diverter/Converger Valves for the Plastic Industry

• 3, 4, 5, 6, 8, 10 & 12 (75, 100, 125, 150,200, 250 & 300 mm) sizes available
• 15 PSIG (1.1 Kg/cm²) & 150°F (65°C) std. design
• Lip type shaft seals
• Non lubricating type bearings
• Double acting air cylinder
• NEMA 4, 7, 9 electrical rating
• Dual solenoid with manual override, 120 V.
• 2 SPDT limit switches
• Prepiped and prewired to a switch box
• Combinations of aluminum/stainless steel materials of construction
• Flanged connections

45 Degree Diverter/Converger Valves for the Plastic Industry

• 3, 4, 5, 6, 8, 10 & 12 (75, 100, 125, 150,200, 250 & 300 mm) sizes available
• 15 PSIG (1.1 Kg/cm²) & 150°F (65°C) std. design
• Lip type shaft seals
• Non lubricating type bearings
• Double acting air cylinder
• NEMA 4, 7, 9 electrical rating
• Dual solenoid with manual override, 120 V.
• 2 SPDT limit switches
• Prepiped and prewired to a switch box
• Combinations of aluminum/stainless steel materials of construction
• Flanged connections

90 Degree Diverter/Converger Valves for the Plastic Industry

• 3, 4, 5, 6, 8, 10 & 12 (75, 100, 125, 150,200, 250 & 300 mm) sizes available
• 15 PSIG (1.1 Kg/cm²) & 150°F (65°C) std. design
• Lip type shaft seals
• Non lubricating type bearings
• Double acting air cylinder
• NEMA 4, 7, 9 electrical rating
• Dual solenoid with manual override, 120 V.
• 2 SPDT limit switches
• Prepiped and prewired to a switch box
• All aluminum construction
• Flanged connections

Two-Way Gravity Diverter Gate

General

The diverter gate offers high operating efficiency and long life. Body, end plates, and gate are rugged castings, fully ribbed to ensure dimensional stability. The body and diverter gate are machined to close tolerances to prevent leakage and ensure smooth operation. Bearings are of the non-lubricating type. Lip-type shaft seals provide gas-tight performance.

Materials of construction

This product is available in either Class 50 cast iron, 319 aluminum. Bearings are Oilite® bronze, and lip seals are nitrile. Other seal materials are available.

Temperature limitation 

Standard gates are suitable for material temperature up to 225°F (107°C).

Conveying Line Valve 2-Way Diverter/Converger

General

The FLSmidth Type SK Two-way Valve is available in eight standard sizes; 3 through 6- inch (75 through 150 mm) valves match I.D. of standard pipe; 8 through 14-inch (200 through 350) match I.D. of standard Schedule 30 pipe. Available hand or left hand mounting. Design for 400°F Max. temperature

Body -

Durable cast iron construction.

Disc -

The internal mechanism works on the sliding disc and port principle. Hardened seats and discs resist abrasion and are lapped to maintain a positive seal at the closed port.

Motor -

Motor operation features a built-in mechanical brake for accurate positioning of the valve seal disc.

Discharge Valve Swing Gate

General

The FLSmidth Swing Gate is a manually operated, self-locking discharge valve. in an open position it presents minimum obstruction to dust discharge flow. This gate features a post-center toggle locking device.

Body

The body is a single, cast iron unit that is designed to create an airtight seal with the swing-gate seal.

Gate

The Swing Gate is mechanically tensioned against the body valve seat using a gasket. Rubber gasket permits use up to 250° F (121° C). Special silicone seal gasket extends operating range up to 400° F (205° C).

Discharge Valve Two-Gate (Motor-Operated) Valve

General

The FLSmidth Two-Gate Valve provides a dual-gate airlock seal against a differential pressure up to 17” W.G. and will withstand material temperatures up to 400°F (205°C). For material temperatures to 700°F (371°C). special motors and heat shields can be provided at extra cost.

Body

The valve body is constructed of seven (7) gauge fabricated steel plate. Inspection plate cover permits easy service access.

Gates

The FLSmidth Two-Gate Valve has two (2) sealing gates which alternately open and closes as material passes through the unit in order to maintain a seal between material inlet and outlet. The alternating cycle is mechanically operated using an eccentric and gear motor arrangement. Simple gravity release produces non-jamming return operation. Steel gates are mounted on a finished shaft rotating freely on outboard self-aligning ball bearings.

Motor 

Gear motors are TEFC, 3 phase, 230/460 Volt AC, 60 Hz.

Discharge Valve Trickle Valve

General

The FLSmidth Trickle Valve is an adjustable, counter-weight discharge valve which automatically responds to flap gate imbalance by releasing collected material. Good for applications up to 400° F (205° C).

Body

The body is durable twelve (12) gauge steel plate construction. Simple design presents minimum material restriction.

Gate

Constructed of steel plate, the flap gate is gravity-operated with an adjustable counterweight. The flap gate is mounted on a finished shaft and rotates freely on outboard, self-aligning ball bearings.

Conveying Line Valve One-Way Cut-off

General

The FLSmidth Type SK One-Way Cutoff Valve is available in six basic sizes. The 3 through 6-inch (75 -150 mm) valves match the I.D. of standard Schedule 40 pipe. The 8 and 10-inch (200 and 250 mm) valves match the I.D. of standard Schedule 30 pipe. Operating temperature up to 400° F (205° C).

Body

Durable machined cast iron construction.

Disc

The valves employ replaceable hardened seats and discs, ground and lapped to ensure positive sealing. Air cylinder actuator provides fast and positive cutoff operation. 50 to 100 PSlG (3.5 to 7 Kg/cm2) clean plant air required.

Material Feed Valve

• 450 iron construction (575 BHN) inlet, disc, seat and tee
• Cast iron body
• Beveled inlet connection with 150 lb. drilled half couplings
• 400°F (205°C) standard design temperature
• Air cylinder actuated with single solenoid, 120V, manual override
• 2-S.P.D.T. NEMA 4 limit switches
• Sizes - material inlet - 8" and 12" (200 mm and 300 mm) pipeline - 3", 4", 5", 6", 8",10" (75mm, 100mm, 125mm, 150mm, 200mm, 250mm)

Special designs: 850°F (450°C) design, voltages, switch ratings

Butterfly Valves

FLSmidth is proud to offer a new line of high quality butterfly valves to meet the requirements of today's market. Combining years of field application experience in the minerals and cement markets, with research and development, FLSmidth has designed many unique features into the valve, resulting in longer service life, greater reliability, ease of parts replacement and interchangeability of components.