CXC - Flange Heater (Copper Sheath, High Density)

Caloritech™ CXC Flange Heaters are used primarily for water heating applications and feature copper sheathed elements silver brazed to a steel flange.

Features & Benefits At A Glance

• Available in a range of sizes from 2.5" to 14" (64 mm to 356 mm) (flange diameter) and up to 135" (3430 mm) (immersed length)
• Available in a variety of voltages from 208V to 600V
• Standard wall sheath thickness of 0.035"
• Built-in thermostats, thermocouples, thermostat wells and high limits available
• Vented or stilted housings ensure that connection wire does not overheat
• NEMA 4 explosion resistant, moisture resistant and/or flame proof terminal housings available
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

CXF - Flange Heater (Incoloy® Sheath, Low/Medium Density)

Caloritech™ CXF Flange Heaters are used primarily for heating applications involving oils, gases and mildly corrosive liquids. They are constructed of incoloy^® sheathed elements silver brazed to a steel flange, similar to the CXI Flange Heater. However, the CXF model is lower density and more suitable for stagnant or heavy oils, or for high temperature, low flow gas heating.

• Available in a range of sizes from 2.5" to 14" (64 mm to 356 mm) (flange diameter) and up to 135" (3430 mm) (immersed length)
• Available in a variety of voltages from 208V to 600V
• Standard wall sheath thickness of 0.035"
• Built-in thermostats, thermocouples, thermostat wells and high limits available
• Vented or stilted housings ensure that connection wire does not overheat
• NEMA 4 explosion resistant, moisture resistant and/or flame proof terminal housings available
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

CXI - Flange Heater (Incoloy® Sheath, High Density)

Caloritech™ CXI Flange Heaters are well suited for heating water, especially in hot water and steam boilers, as well as heating mildly corrosive solutions in rinse tanks, spray washers, etc. The heater features incoloy^®sheathed elements silver brazed to steel flange.

• Available in a range of sizes from 2.5" to 14" (64 mm to 356 mm) (flange diameter) and up to 135" (3430 mm) (immersed length)
• Available in a variety of voltages from 208V to 600V
• Extra heavy wall sheath (0.049" or 0.065") available
• Optional chemically passivated sheath available for superior corrosion resistance and longer life in highly corrosive applications
• Built-in thermostats, thermocouples, thermostat wells and high limits available
• Vented or stilted housings ensure that connection wire does not overheat
• NEMA 4 explosion resistant, moisture resistant and/or flame proof terminal housings available
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

MXS - Gain and Gate Guide Heater

The Caloritech™ MXS Gain and Gate Guide Heaters are specifically designed to prevent ice build-up on sluice gate guides or bodies. The heater is usually installed in a vertical well or duct of round or square cross section having a round nozzle at the top for fastening. Heating elements are silver brazed into a water tight terminal housing having recessed base for mounting. Unlike open wire heaters with ceramic supports, MXS heaters can be coiled to a six foot diameter to facilitate shipping and handling.

Features & Benefits At A Glance

• Hermetically sealed heating elements prevent moisture ingression over prolonged periods of non-service
• Available in single or dual wattages; wattage may range from 6 W to 18 W per lineal inch, depending on conditions; for extra long heaters, utilize 480V or 600V to ensure that the heater can be built
• Box dimensions range from 5" x 4.13" (127 mm to 105 mm) to 5" x 3" (127 mm to 76 mm)
• Maximum box diameter ranges from 3.63" to 4.88" (92 mm to 124 mm)

WXS - Gate Body Duct Heater

The Caloritech™ WXS Gate Body Duct Heater is custom engineered to heat the inside of a gate and prevent ice build-up on gate walls, windseals and end members. It can be connected to a duct having various elevations within the gate. This unit features a weatherproof duct heater and matched motor, and a high static axial fan assembly installed within a galvanized heavy steel housing.

Features & Benefits At A Glance

• hermetically sealed heating elements prevent moisture ingression over prolonged periods of non-service
• standard wattages range from 4kW to 120kW
• available control options include ambient temperature sensing thermostat, outlet air temperature thermostat, limit control and differential pressure switch
• voltage and phase built to spec
• custom control panels for sluice gate heating control available
• CSA & C/US approved; GOST approved for global markets

DXLC/DXRC - Bottom Mount Immersion Heater (Copper Sheath)

The Caloritech™ DXLC and DXRC Bottom Mount Immersion Heaters are designed for use in most liquid heating applications. They feature copper-sheathed heating elements silver brazed to a welded 304 stainless steel box and riser.

Features & Benefits At A Glance

• Standard available voltages range from 208V to 600V, 1 or 3 phase; special voltage available upon custom order
• Standard wattages range from 3kW to 18kW; special wattage available upon custom order
• Standard element lengths range from 12.4" to 51.8" (315 mm to 1316 mm)
• Standard watt density ranges from 53 W/in.² to 60 W/in.², depending on wattage and dimensions selected
• Special features available upon custom order include multiple rows of elements to increase wattage, built-in thermostat or high limit controller, 4" (102 mm) sludge legs and explosion-proof construction
• _cCSA_us approved; GOST approved for global markets

DXLI/DXRI - Bottom Mount Immersion Heater (High Density Incoloy® Sheath)

The Caloritech™ DXLI and DXRI Bottom Mount Immersion Heaters are designed for use in most liquid heating applications. They feature high density incoloy® sheathed heating elements and 304 stainless steel immersed parts in a fully welded construction.

Features & Benefits At A Glance

• Standard available voltages range from 208V to 600V, 1 or 3 phase; special voltage available upon custom order
• Standard wattages range from 3 kW to 18 kW; special wattage available upon custom order
• Standard element lengths range from 12.4" to 51.8" (315 mm to 1316 mm)
• Standard watt density ranges from 53 W/in.² to 60 W/in.², depending on wattage and dimensions selected
• Special features available upon custom order include multiple rows of elements to increase wattage, built-in thermostat or high limit controller, 4" (102 mm) sludge legs, passivation and explosion-proof construction
• _cCSA_us approved; GOST approved for global markets

DXLF/DXRF - Bottom Mount Immersion Heater (Low Density Incoloy® Sheath)

The Caloritech™ DXLF and DXRF Bottom Mount Immersion Heaters are designed for use in most liquid heating applications. They feature low density incoloy^® sheathed heating elements and steel immersed parts in a fully welded construction.

Features & Benefits At A Glance

• Standard available voltages range from 208V to 600V, 1 or 3 phase; special voltage available upon custom order
• Standard wattages range from 3 kW to 9 kW; special wattage available upon custom order
• Standard element lengths range from 22.2" to 51.8" (564 mm to 1316 mm)
• Standard watt density ranges from 14 W/in.² to 30 W/in.², depending on wattage and dimensions selected
• Special features available upon custom order include multiple rows of elements to increase wattage, built-in thermostat or high limit controller, 4" (102 mm) sludge legs, passivation and explosion-proof construction
• _CCSA_US approved; GOST approved for global markets

CXC - Domestic Immersion Heater (Copper Sheath)

Caloritech™ CX Domestic Immersion Heaters were developed as high quality replacements for the most commonly used heater types. The CXC is available in a range of styles, including 2.5" (64 mm) square flange with tinned copper sheath, 1" (25 mm) tapered brass plug with copper sheath, 1" (25 mm) non-tapered brass plug with copper sheath and round flange with zinc plated copper sheath. Elements are epoxy-coated to protect the heater from moisture and other contaminants that can lead to premature element failure.

Features & Benefits At A Glance

• Standard available element lengths range from 5.5" to 21" (140 mm to 533 mm), depending on the style of heater selected; special lengths may be available on custom order
• Standard available voltages of 120V, 208V and 240V; round flanged zinc plated style available in 240V only
• Standard wattages range from 500 W to 6000 W, depending on element length

CXF - Domestic Immersion Heater (Incoloy® Sheath)

Caloritech™ CXF Screwplug Heaters are used primarily for oil heating applications and feature incoloy^®elements silver brazed into a steel screwplug. Low watt density units are used for heavier non-circulated oils, while higher watt density units are suitable for light oils or in forced oil circulation loops. Units are available with optional standard built-in thermostat - a one pole device limited to 240V 25 amp with a range of 10°C to 120°C (50°F to 250°F). 600V thermostats, double pole thermostats and alternative temperature range thermostats are available upon special request.

Features & Benefits At A Glance

• Available standard with 1" (25 mm) plugs, 1.25" (32 mm) plugs, 2" (51 mm) plugs or 2.5" (64 mm) plugs; additional custom plug sizes and ratings available (check factory for availability); available with up to 135" (3430 mm) immersed length
• Available in a variety of standard voltages from 120V to 600V; special voltage ratings available in custom built heaters (check factory for availability)
• Optional built-in thermostat well, NEMA 4 terminal housing for outdoor applications and explosion-proof terminal housing for hazardous environments
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

FPH – Flanged Pipe Insert Heater

The Caloritech™ FPH Flanged Pipe Insert Heater (also known as an insert tank heater) is uniquely designed to heat storage tanks containing viscous, corrosive or heat sensitive materials including asphalt, tar, fuel, oils, paint and glue. The FPH provides a safe, cost-effective low maintenance solution for tank heating. By enclosing the heating elements within a sealed pipe insert, elements do not come in direct contact with the heated product and elements can be removed for servicing while the tank and its contents remain in service.

Features & Benefits At A Glance

• Standard heaters utilize 2“, 2 1/2” or 3” SCH.40 steel pipe welded to a 150 lb ANSI rated steel flange; custom mounting types and sizes available on special order
• Standard wattages range from 2 kW to 255 kW, depending on mount and element type
• Standard voltages range from 208V to 600V
• Standard insert lengths range from 60” to 240”, depending on mounting type, element type and wattage selected; custom lengths are available on special order
• Each pipe in the header is fitted with an independent heating element that can be individually removed for maintenance while the tank remains in service.
• Standard and custom design control panels available
• Certified to cCSAus Hazardous Locations Class I, Divisions 1 & 2, Groups C & D; CSA Type 4; Temperature Coded T1 – T6

DXC - Over-The-Side Immersion Heater (Copper Sheath)

Caloritech™ DXC Over-The-Side Immersion Heaters feature copper sheathed elements and are typically used for heating water or water solutions that will not corrode copper. They are ideal where easy removal of the heater for cleaning or inspection is required. The DXC is available in single phase or three phase with single element or three element configurations.

Features & Benefits At A Glance

• Available in a range of wattages, from 3 kW to 7.5 kW for the single element unit and from 9 kW to 22.5 kW for the three element unit
• Available in a variety of standard voltages from 208V to 600V
• Unit weight of 8.8 lbs (4 kg) for the single element unit and 22 lbs (10 kg) for the three element unit
• _cCSA_us approved; GOST approved for global markets

DXI - Over-The-Side Immersion Heater (Incoloy® Sheath)

Caloritech™ DXI Over-The-Side Immersion Heaters feature incoloy® sheathed elements and are typically used in water rinse tank heating applications where contaminants that would be corrosive to copper are present. They are also suitable for oil based solutions and other chemical solutions that are not corrosive to incoloy^®. They are ideal where easy removal of the heater for cleaning or inspection is required. The DXI is available in single phase or three phase with single element or three element configurations.

Features & Benefits At A Glance

• Available in a range of wattages, from 3 kW to 7.5 kW for the single element unit and from 9 kW to 22.5 kW for the three element unit
• Available in a variety of standard voltages from 208V to 600V
• Unit weight of 8.8 lbs (4 kg) for the single element unit and 22 lbs (10 kg) for the three element unit
• _cCSA_us approved; GOST approved for global markets

DXN - Over-The-Side Immersion Heater (Inconel® Sheath)

Caloritech™ DXN Over-The-Side Immersion Heaters feature high grade inconel^® sheathed elements and are typically used in liquid heating applications where copper, stainless or incoloy^® are unsuitable because the solution being heated would be corrosive to these materials. They are ideal where easy removal of the heater for cleaning or inspection is required. The DXN is available in single phase or three phase with single element or three element configurations.

Features & Benefits At A Glance

• Available in a range of wattages, from 3 kW to 7.5 kW for the single element unit and from 9 kW to 22.5 kW for the three element unit
• Available in a variety of standard voltages from 208V to 600V
• Unit weight of 8.8 lbs (4 kg) for the single element unit and 22 lbs (10 kg) for the three element unit
• _cCSA_us approved; GOST approved for global markets

DXS - Over-The-Side Immersion Heater (Steel Sheath)

Caloritech™ DXS Over-The-Side Immersion Heaters feature steel sheathed elements and are typically used in water rinse tank heating applications where contaminants that would be corrosive to copper are present. They are also suitable for oil based solutions and other chemical solutions that are not corrosive to stainless steel. They are ideal where easy removal of the heater for cleaning or inspection is required. The DXS is available in single phase or three phase with single element or three element configurations.

Features & Benefits At A Glance

• Available in a range of wattages, from 3 kW to 7.5 kW for the single element unit and from 9 kW to 22.5 kW for the three element unit
• Available in a variety of standard voltages from 208V to 600V
• Unit weight of 8.8 lbs (4 kg) for the single element unit and 22 lbs (10 kg) for the three element unit
• _cCSA_us approved; GOST approved for global markets

DXT - Over-The-Side Immersion Heater (Titanium Sheath)

Caloritech™ DXT Over-The-Side Immersion Heaters feature titanium sheathed elements and are typically used in liquid heating applications where copper, stainless or incoloy^® sheathed heaters are unsuitable because the solution being heated would be corrosive to these materials. They are ideal where easy removal of the heater for cleaning or inspection is required. The DXT is available in single phase with single element configuration.

Features & Benefits At A Glance

• Available in a range of wattages, from 3 kW to 7.5 kW
• Available in a variety of standard voltages from 208V to 600V
• Unit weight of 8.8 lbs (4 kg)
• _cCSA_us approved; GOST approved for global markets

HX - Over-the-Side Immersion Heater (Teflon® Sleeved, Incoloy® Sheath, Spiral-Configured Element)

The Caloritech™ HX Over-the-Side Immersion Heater with Teflon^® sleeved, spiral-configured incoloy^® element is a space efficient solution for liquid heating applications where easy removal of the heater for cleaning or inspection is required. A polypropylene guard is supplied as standard with the unit.

Features & Benefits At A Glance

• Incoloy^® heating element fitted with 0.030" Teflon^® tube
• Easily accessible flame-retardant polypropylene terminal housing provides vapour-tight construction; terminal box fitted with 36" (914 mm) liquid-tight and acid-resistant flexible conduit with lead wires
• Positive metal ground provided for safe installation
• Field-replaceable "one time" thermal fuse that protects the heater from burn-out on low liquid levels is supplied
• Standard wattages range from 1 kW to 6 kW
• Standard cold section lengths range from 5" to 13" (127 mm to 330 mm)
• Standard element lengths (including cold section) range from 11" to 40" (279 mm to 1016 mm)
• Standard voltages range from 120V to 600V, depending on heater size; some voltages may not be available for some sizes

MX - Pipe-Insert Immersion Heater

The Caloritech™ MX Pipe-Insert Immersion Heater is designed to provide uniformly distributed heat to storage vessels containing high viscosity liquids such as asphalt, molasses, tar, paint, glue, wax and oils without causing charring or coking. Units are installed in a suitable metal pipe contained inside the storage vessel (minimum 2" (51 mm) diameter), then heat is transferred safely from the heating element of the MX heater to the inner wall of the pipe by a combination of convection and radiation. This heater is a safe, cost-effective and virtually maintenance-free solution that eliminates the need for high maintenance pumps or open flames, which may present a fire hazard, especially when the liquid being heated is flammable.

Features & Benefits At A Glance

• Standard construction features heavy-duty alloy sheathed elements fitted to choice of 3" (76 mm) 150 lb steel flange or 2" (51mm) NPT screwplug; custom mounting types and sizes available on special order
• Available with single hairpin element, double hairpin elements or three straight elements; double hairpin element heaters can be wired in single or three phase, open delta; three element heaters are suitable for three phase wiring only
• NEMA 4 terminal box suitable for outdoor applications
• Can be coiled to a 6 ft diameter to permit installation or removal where space restrictions exist
• Optional built-in thermocouple for low-level liquid detection available; one 1" NPT conduit fitting provided on units without thermocouple; additional 1/2" NPT conduit fitting provided on units with built-in thermocouple
• Standard wattages range from 2 kW to 16 kW, depending on mount and element types selected
• standard voltages range from 208V to 600V
• Standard insert lengths range from 45.3" (1150 mm) to 425.2" (10,800 mm), depending on mounting type, element type and wattage selected; custom lengths are available on special order
• Optional explosion-proof housing with externally adjustable thermostat for limit sensing available
• For applications that require higher kW ratings than individual pipe heaters can provide, special assemblies of closely spaced pipes mounted to a common header are available; each pipe in the header is fitted with a special heating element
• Standard or custom designed control panels available
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

CXC - Screwplug Heater (Copper Sheath/Brass Plug)

Caloritech™ CXC Screwplug Heaters are used primarily for water heating applications and feature brass screwplugs with a copper sheath. Units are available with optional standard built-in thermostat - a one pole device limited to 240V 25 amp with a range of 10°C to 120°C (50°F to 250°F). 600V thermostats, double pole thermostats and alternative temperature range thermostats are available upon special request.

Features & Benefits At A Glance

• Available standard with 1" (25 mm) plugs, 1.25" (32 mm) plugs, 2" (51 mm) plugs or 2.5" (64 mm) plugs; additional custom plug sizes and ratings available (check factory for availability); available with up to 135" (3430 mm) immersed length
• Available in a variety of standard voltages from 120V to 600V; special voltage ratings available in custom built heaters (check factory for availability)
• Optional built-in thermostat well, NEMA 4 terminal housing for outdoor applications and explosion-proof terminal housing for hazardous environments
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

CXF - Screwplug Heater (Incoloy® Sheath/Steel Plug)

Caloritech™ CXF Screwplug Heaters are used primarily for oil heating applications and feature incoloy® elements silver brazed into a steel screwplug. Low watt density units are used for heavier non-circulated oils, while higher watt density units are suitable for light oils or in forced oil circulation loops. Units are available with optional standard built-in thermostat - a one pole device limited to 240V 25 amp with a range of 10°C to 120°C (50°F to 250°F). 600V thermostats, double pole thermostats and alternative temperature range thermostats are available upon special request.

Features & Benefits At A Glance

• available standard with 1" plugs, 1 1/4" plugs, 2" plugs or 2 1/2" plugs; additional custom plug sizes and ratings available (check factory for availability); available with up to 135" immersed length
• available in a variety of standard voltages from 120V to 600V; special voltage ratings available in custom built heaters (check factory for availability)
• optional built-in thermostat well, NEMA 4 terminal housing for outdoor applications and explosion-proof terminal housing for hazardous environments
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

CXI - Screwplug Heater (Incoloy® Sheath/Stainless Steel Plug)

Caloritech™ CXI Screwplug Heaters are used primarily for liquid heating applications and are suitable for heating mildly corrosive solutions. They use higher density incoloy® elements welded into a stainless steel screwplug. Units are available with built-in adjustable thermostat and explosion-proof housing (as pictured).

Features & Benefits At A Glance

• available standard with 2" plugs or 2 1/2" plugs; additional custom plug sizes and ratings available (check factory for availability); available with up to 135" immersed length
• available in a variety of standard voltages from 120V to 600V; special voltage ratings available in custom built heaters (check factory for availability)
• optional built-in thermostat well, NEMA 4 terminal housing for outdoor applications and explosion-proof terminal housing for hazardous environments
• optional chemically passivated sheath available for superior corrosion resistance and longer life in highly corrosive applications
• CE/ATEX approved for use in Hazardous Locations, and GOST approved for global markets

TX - Urn Heater

The Caloritech™ TX Urn Heater is a bottom mount style immersion heater intended for use in liquid heating applications.Steam tables, coffee urns, kettles, sterilizers, percolators and other water heating applications. Standard units feature a brass mounting flange and a copper sensing capilliary with copper element sheath, however other materials such as incoloy® are available on special order.

Features & Benefits At A Glance

• Fully pre-wired elements
• O-ring sealing gasket
• Fast response low level trip feature extends heater life
• Low water level cutouts for low water conditions available
• Available in one, two or three element configurations
• A range of standard wattages available, from 1.0 kW to 7.5 kW
• Available in 120V, 208V and 240V standard voltages
• CSA approved; GOST approved for global markets